Specification :
Improve the sound capture quality of your camera rig without draining your budget with the Saramonic SR-VM4, a camera-mount shotgun microphone offering directional sound pickup, customizable audio settings (gain and low-cut filter), and fast setup for vloggers, news shooters, and run-and-gun videographers. Additionally, it comes with a foam windscreen and a furry windshield for effective wind protection indoors and outside.
Powered by two AA batteries (available separately), the SR-VM4 can run gig after gig for up to 720 hours. Its construction features lightweight ABS material and an integrated shoe shockmount, ensuring hassle-free setup and isolation from vibration and camera noise. The attached cable has a 3.5mm TRS mini plug for simple hookup to the mic input on your camera or portable audio recorder.
| Form Factor | Camera-Mount |
| Sound Field | Mono |
| Operating Principle | Pressure Gradient |
| Capsule | Condenser |
| Polar Pattern | Supercardioid |
| Orientation | End Address |
| Circuitry | Solid-State |
| Pad | None |
| High-Pass Filter | 75 Hz |
| Tone Adjustment | None |
| Gain Adjustment | -10 to +20 dB |
| Indicators | 1 x Green/Red Single LED (Battery, Power) |
| On-Board Controls | Gain/Sensitivity, High-Pass Filter |
| Windscreen | Foam, Windsock/Windjammer (Included) |
| Frequency Range | 20 Hz to 20 kHz |
| Impedance | 50 Ohms |
| Sensitivity | -32 dBV/Pa at 1 kHz |
| Signal-to-Noise Ratio | 80 dB |
| Output Connectors (Analog) | 1 x 1/8" / 3.5 mm TRS Male (on Attached Cable) |
| Headphone Connector | None |
| Operating Voltage | 3 V (Battery Power) |
| Battery Type | 2 x AA (Not Included) |
| Approximate Battery Life | 720 Hours |
| Mounting | Camera/Shoe-Mount, Shockmount (via Integrated Hardware) |
| Included Case | None |
| Construction Material | ABS |
| Operating Temperature | -4 to 140°F / -20 to 60°C |
| Dimensions | H: 4.3 x W: 2.1 x L: 9.4" / H: 10.8 x W: 5.4 x L: 23.9 cm |
| Weight | 4.97 oz / 141 g |
| Package Weight | 0.775 lb |
| Box Dimensions (LxWxH) | 11 x 5.6 x 3" |